ご覧いただきありがとうございます。
入札前に必ず下記説明欄をご確認下さいますようお願いいたします。
□製品詳細 ＃Juniper Networks/ジュニパーネットワークス SRX550 初期化済 No.12

ご覧頂きありがとうございます。
本体は初期化済です。

出品内容：写真に写っている本体と、こちらで用意した電源コードで全てとなります。
※説明書等その他の付属品はございません。

サイズ：約幅48×奥行き51×高さ9cm
重さ：11.3kg

詳しい情報はメーカーサイトをご覧ください→こちら □動作確認、返品について 動作確認の範囲：知識不足、環境不足のため以下の範囲となります。

１：入電確認
２：内部データ初期化
３：下記コンソール出力ログにて程度の判断お願いします。

※ポートのチェックはしておりません。
※通信の確認はしておりません。
※通電、初期化以外につきましては保証範囲外とさせていただきます。
ご了承の上、入札にご参加下さい。

root> show version
Model: srx550
JUNOS Software Release [12.1X47-D20.7]

root> show system alarms
2 alarms currently active
Alarm time Class Description
2021-11-16 01:28:49 UTC Minor Autorecovery information needs to be saved
2021-11-16 01:28:49 UTC Minor Rescue configuration is not set

root> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis *********SRX550
Midplane REV 22 750-035027 ACMD3783
Routing Engine REV 12 711-035026 ACMG6184 RE-SRXSME-SRX550
FPC 0 FPC
Power Supply 0 Rev 04 740-024283 ZD61288 PS 645W AC
Power Supply 1 Rev 04 740-024283 ZC59647 PS 645W AC

root> show system autorecovery state
Configuration:
File Recovery Information Integrity Check Action / Status
rescue.conf.gz Not Saved Not checked Requires save
Licenses:
File Recovery Information Integrity Check Action / Status
JUNOS635752.lic Saved Passed None
JUNOS635753.lic Saved Passed None
JUNOS635754.lic Saved Passed None
JUNOS635755.lic Saved Passed None
JUNOS635756.lic Saved Passed None
BSD Labels:
Slice Recovery Information Integrity Check Action / Status
s1 Saved Passed None
s2 Saved Passed None
s3 Saved Passed None
s4 Saved Passed None

root> show chassis environment
Class Item Status Measurement
Temp Routing Engine OK 25 degrees C / 77 degrees F
Routing Engine CPU OK 25 degrees C / 77 degrees F
Routing Engine Absent
Routing Engine CPU Absent
Fans SRXSME Chassis Fan 0 OK Spinning at normal speed
SRXSME Chassis Fan 1 OK Spinning at normal speed
SRXSME Chassis Fan 2 OK Spinning at normal speed
SRXSME Chassis Fan 3 OK Spinning at normal speed
Power Power Supply 0 OK
Power Supply 1 OK

root> show system boot-messages
kld_map_v: 0x8ff80000, kld_map_p: 0x0
Copyright (c) 1996-2015, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.1X47-D20.7 #0: 2015-03-03 21:14:59 UTC
[email protected]:/volume/build/junos/12.1/service/12.1X47-D20.7/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel
JUNOS 12.1X47-D20.7 #0: 2015-03-03 21:14:59 UTC
[email protected]:/volume/build/junos/12.1/service/12.1X47-D20.7/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel
real memory = 2147483648 (2048MB)
avail memory = 956821504 (912MB)
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
netisr_init: !debug_mpsafenet, forcing maxthreads from 6 to 1
cpu0 on motherboard
: CAVIUM"s OCTEON 63XX CPU Rev. 0.10 with no FPU implemented
L1 Cache: I size 37kb(128 line), D size 32kb(128 line), direct mapped.
L2 Cache: Size 2048kb, 16 way
obio0 on motherboard
uart0: on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
cpld0 on obio0
pcib0: on obio0
Disabling Octeon big bar support
pcib0: Initialized controller
pci0: on pcib0
pci0: at device 0.0 (no driver attached)
pcib1: on obio0
pci1: on pcib1
pcib2: mem 0xf0000000-0xf001ffff irq 0 at device 0.0 on pci1
pci2: on pcib2
pcib3: irq 0 at device 1.0 on pci2
pci3: on pcib3
pcib4: irq 0 at device 2.0 on pci2
pci4: on pcib4
pcib5: irq 0 at device 4.0 on pci2
pci5: on pcib5
pci5: at device 0.0 (no driver attached)
pcib6: irq 0 at device 5.0 on pci2
pci6: on pcib6
pcib7: irq 0 at device 6.0 on pci2
pci7: on pcib7
pcib8: irq 0 at device 7.0 on pci2
pci8: on pcib8
pcib9: irq 0 at device 8.0 on pci2
pci9: on pcib9
atapci0: mem 0xf0700000-0xf070007f,0xf0740000-0xf0743fff irq 0 at device 0.0 on pci9
ata0: on atapci0
ata0: signature=00000101
ata1: on atapci0
pcib10: irq 0 at device 9.0 on pci2
pci10: on pcib10
pcib11: irq 0 at device 10.0 on pci2
pci11: on pcib11
pcib12: irq 0 at device 12.0 on pci2
pci12: on pcib12
pcib13: irq 0 at device 14.0 on pci2
pci13: on pcib13
ehci0: on obio0
usb0: EHCI version 1.0
usb0 on ehci0
usb0: USB revision 2.0
uhub0: vendor 0x0000 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
gblmem0 on obio0
octpkt0: on obio0
cfi0: on obio0
Timecounter "mips" frequency 1300000000 Hz quality 0
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
ata0: signature=00000101
ad0: FAILURE - SETFEATURES ENABLE APM timed out
ad0: Changing APM level failed
ad0: 1919MB at ata0-master WDMA2
Trying to mount root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
WARNING: / was not properly dismounted

root>

【返品について】
落札者様都合による返品はお受けできません。
商品説明欄と異なる それ以降は一切お受けしませんので、商品到着後は速やかなチェックをお願い致します。

入札前の下見は歓迎いたしますので、ストア情報にある番号にてお問い合わせください。 □